Synching your Gateway and Camera

Synching your Gateway and Camera

The Camera and Gateway are synced at the factory for privacy reasons. If the Camera and Gateway are not syncing with each other for any reason, please sync them as described below.

  1. Move the Camera to the same area as the Gateway. Make sure that both the Bateway and Camera are powered on.
  2. Make sure that the Ethernet/LAN port on the back of your wireless router cable/DSL modem.
  3. Press the “CODE” button on the back of the Gateway to sync. The Red power LED will start blinking and within 20 seconds, press the “CODE” button at the back of the camera.
  4. Once synced successfully, synced power LED on Gateway will turn green. Internet light will blink green to show internet connection.